You must have probably experienced a dead battery issue in your vehicle once in a lifetime. Be it your fault for leaving the headlights on or the old battery. If you want to solve this issue at home, you will need a jump starter. A jump starter like jnc660 can become your mini mechanic. A jump starter is also known as a boost in automotive industry. It is a power device that you can use to start your car with the help of an ejected battery.
In this case, you are required to use an external source such as any vehicle or other power to draw the temporary connection. It is a helpful process to start your car without any manual help required. Many people are curious about how a jump starter works if you are also here to get the answer to this question. Keep reading this article till the end.
How Does a Jump Starter Work?
A jump starter works with the help of a Lithium-Ion battery with high current power. It provides power to the engine so that it is started quickly. These jump starter batteries are rechargeable batteries that do not need charging after a year of the purchase date. There are various ways to use a jump start which you will find out in the article ahead.
How To Start Your Vehicle By Jump Starter With The Help Of Direct-To-Battery Method?
The direct-to battery method is the first method through which a jump starter works. To carry out this method, you must connect the jumper cables to the terminals of the battery. The red wire is attached to the positive terminal, and the black one is to the negative terminal. Now you are required to connect jumper cables to the jump starter. Once the LED in the jumper cable turns green, your vehicle is ready to start. Now disconnect the wires in the reverse order, and your car is prepared to be driven.
How To Start Your Vehicle by Jump Starter From Within The Car?
Some jump starters can perform while you operate them from within your car. You will need an accessory port to carry out this process. There are a few steps for this process, which are listed below:
- Firstly, switch off all the retrofits of your car and connect the jumper cable.
- Turn on the ignition of your vehicle. Wait for the jump starter to start. It shows a starting sign as “Output Ready” within fifteen minutes of the connection.
- Now you can easily start your vehicle and disconnect the portable jump starter from the car.
Any of these two methods can be helpful for you to start your car without calling an expert to the home or taking your vehicle to the workshop. But if your car doesn’t start from these two methods, talk to the mechanic to avoid any damage.
Wrap Up
You are good to go if you can start your car with the jump starter! But if your vehicle has any significant issues, do consult an expert to get it repaired. I hope this article was of help. For more information, keep visiting our website. Happy Reading!
